To adapt the additional equipment to your machine, we always need: make, type, peak height and, if necessary, Bed cross-section from the machine bed.
All additional devices are perfectly matched to Hager turnet benches.
Adjustments to external products can cause a more complicated clamping, greater build-up loss level and higher costs.
with adjustable dovetail guides, fine scaling, grade size 180°, plan adjustment 250 mm, longitudinal adjustment 175 mm, height above lathe bed 71mm at tip height 250mm base plates for steels; square wrench extends rotatable 4-fold steel holder for steels up to 20 mm with independent locking at 90° weight approx. 38 kg
HPVC base body Ø120mm x 100mm Contact surface with movable rubber ring Ø160mm Attachment and bores for spring-loaded centering tip Mounting M33 DIN 800 with sealing ring (without spring-loaded centering tip - Article 90212) perfect sealing even with uneven parts Advantage: The rubber ring fits better on the workpiece and compensates for unevenness! Also suitable for clamping bowls on the inside
Aluminium body Ø110x75 mm - internal conical Contact surface for different ball diameters with foam rubber seals Mount M33DIN800 with sealing ring for balls approx. Ø70 - Ø160mm
for foreign manufacturers Type with small body height Tip height 130mm up to 230mm Type: Peak height: Bed distance: Bridge height: infinitely adjustable (without template) for balls from approx. Ø 8mm Play-free special ball bearing guide with adjustable brake new from 7/2024: Boom arm with long holes for more flexible diameter adjustment Construction height 39mm Adjustable distance iron for exact center setting swiveling quill feed with quill travel 50mm and locking screw Height adjustment via pitch ring Unit to be pulled out upwards for fast pivoting motion Chip deflector sheet quickly removable Weight 6.8kg Basic equipment: 1 steel holder 12x12mm with carbide turning plate HW08 2 plastic shells outer Ø 50mm for grinding with inner Ø 20 u. Ø24mm Operating instructions depending on the type: clamping/holding plate according to lathe bed
for Hager fabric with tip height 250mm reinforced, raised version with long carrier rail 300mm infinitely adjustable (without template) for balls from approx. Ø 8mm with pivotable depth stop, ground steel retaining pins (standard height above the lathe bed 57mm) Basic equipment: 1 steel holder 12x12mm with carbide reversible plate HW08 swivel plexiglass protection, attachable chip deflector 2 plastic shells outer Ø 50mm for grinding with inner Ø 20 u. Ø24mm Operating instructions
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearingbasic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122)
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122)
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122)
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122)from center height 300 mm backlash-free turntable Ø 200 mm double angular contact ball bearing with adjustable brake loss of construction 80 mm
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122) from center height 300 mm backlash-free turntable Ø 200 mm double angular contact ball bearing with adjustable brake loss of construction 80 mm
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122) rail 220 mm according to sketch e.g. StratosFU230, NovaDVR, Oneway1640
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122)StratosXL
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122) from center height 300 mm backlash-free turntable Ø 200 mm double angular contact ball bearing with adjustable brake loss of construction 80 mm
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122) from center height 300 mm backlash-free turntable Ø 200 mm double angular contact ball bearing with adjustable brake loss of construction 80 mm
pinole support closed sanded quill exact spindle lock height adjustment ring lateral additional clamping depth stop swung out steel holder 12 x 12 mm adjustable brake no play, double ball bearing basic equipment: - 1 steel holder (81046) - 1 carbide reversing plate HW08 (81019) - 2 plastic bowls outer Ø 50 mm with bore Ø 24 mm and Ø 20 mm (90247) - 1 attachable chip deflector - 1 plexiglass protection (90122) from center height 300 mm backlash-free turntable Ø 200 mm double angular contact ball bearing with adjustable brake loss of construction 80 mm
Operating side of left and right; maximum copy length 320 mm for insertion into the lower part of the hand pad Shaft diameter 30 mm Scanner for sharpening steel and bell knife 1 steel holder 12x12 mm with carbide turnip HW08 1 bell knife Ø 14 mm with cranked holder adjustable plexiglass protection; 1 stencil blank 75 x 4 x 330mm Stencil feed on both sides; hexagon key 13/17mm Operating instructions (Build-up height from hand rest to center of tip approx. 49 mm)
The copier LP320-F is an additional device for copying and facing. It is inserted into the handrest base. Thus, it can be mounted in seconds. The scanning is done via a dual push-button for round and pointed steel. A double-sided fine feed facilitates setting and also serves as an notification the workpiece diameter. The handwheel can be mounted on both sides. The longitudinal and transverse movement runs on play-free guides. operating side on both sides copy length 320 mm - profile depth 62 mm height adjustment ring dual push-button for round and pointed steel 1 HM insert HW08 with steel holder 1 bell-shaped steel holder cranked 12 x 12 mm 1 bell knife Ø 14 mm adjustable plexiglass protection 1 stencil blank 75 x 4 x 330 mm weight approx. 10.5 kg (steel holder 12 x 12 mm)
basic equipment: 1 guide unit with hand rest shaft Ø 30 mm with feed unit and template holder 1 support finely adjustable via handwheel with ball guide rail slide, shaft, star grip and adjustable end stop 1 guide tube with integrated special insert holder 1 carbide reversing plate HW3 1 suction adapter outside diameter 50 mm HPVC - attachableimportant: machine typ Hager
continuous operation vacuum pump with high suction power and quiet running vacuum pump oil-free, dry running - continuous operation suitable - including air filter AC connection with 230 V cable approx. 2 m Pump motor with base and bracket Connecting hose to rotatable feed approx. 1.5 m long L-W-H: 0.3 mx 0.3 mx 0.3 m - weight approx. 7 kg rotatable vacuum supply with pressure gauge connection on handwheel side of the spindle (left side) suitable for hollow spindle diameter 15 or 20 mm bolt with tightening screw and sealing ring opening and closing takes place via slide valve anti-twist device and extension rod (other hollow spindle diameters on request) suction chuck Ø 140 mm made of aluminum contact surface with foam rubber seal on the outside and roughened abrasion-resistant coating ensures a secure hold of the workpiece. female side female thread M33 DIN 800 with sealing ring centering sprung with 25 mm stroke for exact positioning on center
Bowl cutter (Bowlsaver) with 2 blades 1 blade for bowls up to 220 mm diameter 1 blade for bowls up to approx. 300 mm diameter spigot adapter Ø 30 mm with height adjustment ring additional support for tailstock with conical sleeve MT 2
Bowl cutter (Bowlsaver) with 2 blades 1 blade for bowls up to 220 mm diameter 1 blade for bowls up to approx. 300 mm diameter spigot adapter Ø 30 mm with height adjustment ring additional support for tailstock with conical sleeve MT 2
continuous operation vacuum pump with high suction power and quiet running vacuum pump oil-free, dry running - continuous operation suitable - including air filter AC connection with 230 V cable approx. 2 m Pump motor with base and bracket Connecting hose to rotatable feed approx. 1.5 m long L-W-H: 0.3 mx 0.3 mx 0.3 m - weight approx. 7 kg rotatable vacuum supply with pressure gauge connection on handwheel side of the spindle (left side) suitable for hollow spindle diameter 15 or 20 mm bolt with tightening screw and sealing ring opening and closing takes place via slide valve anti-twist device and extension rod (other hollow spindle diameters on request) suction chuck Ø 140 mm made of aluminum contact surface with foam rubber seal on the outside and roughened abrasion-resistant coating ensures a secure hold of the workpiece. female side female thread M33 DIN 800 with sealing ring centering sprung with 25 mm stroke for exact positioning on center
The copier LP320-F is an additional device for copying and facing. It is inserted into the handrest base. Thus, it can be mounted in seconds. The scanning is done via a dual push-button for round and pointed steel. A double-sided fine feed facilitates setting and also serves as an notification the workpiece diameter. The handwheel can be mounted on both sides. The longitudinal and transverse movement runs on play-free guides. operating side on both sides copy length 320 mm - profile depth 62 mm height adjustment ring dual push-button for round and pointed steel 1 HM insert HW08 with steel holder 1 bell-shaped steel holder cranked 12 x 12 mm 1 bell knife Ø 14 mm adjustable plexiglass protection 1 stencil blank 75 x 4 x 330 mm weight approx. 10.5 kg (steel holder 12 x 12 mm)
