copying winding fluting
copying HLK800
This attachment is simply placed on an existing lathe. As a result it can be copied from a stencil or apattern part when copying, the machining is done with a steel. The movement takes a place on high-performance guidance is free of play. It is driven by a handwheel via stocky gear rack drive. In all operations a smooth, free of play movement of scanner and steel holder to handwheel drive is decisive. mounting set: HWK800 additional to winding and fluting For winding, the ball screw is connected free of play to the main spindle by belt and tooth lock washer. The machining takes place by a router. Because of various working depths while winding, the conjunction of workpiece to milling cutter has to be absolutely free of play. All possibilities to handle are easy to attain and to adapt in a matter of seconds. For exact parts for multiple cutting a dividing equipment is needed.
- change gear 48er and HPVC tooth belts 20 and a longer belt (thus, very large slopes but also, for example, threads for bar stools can be made)
- working length 800 mm - surface-mounted loss amant - moveable right supporting arm - steel holder to square shaft 16x16 mm - depth stop over threaded spindle - moveable double-sided end stop - scanning from template and original part- steel holder 16x16 mm with hard metal turning plate HW08 - stencil blank 85x4x1000 mm with notches - weight 46 kg - L-W-H: 1290-725-440 mm (HLK800) - L-W-H: 1690-725-440 mm (HLK1200)
- working length 800 mm - surface-mounted loss amant - moveable right supporting arm - steel holder to square shaft 16x16 mm - depth stop over threaded spindle - moveable double-sided end stop - scanning from template and original part - steel holder 16x16 mm with hard metal turning plate HW08 - stencil blank 85x4x1000 mm with notches - weight 46 kg - L-W-H: 1290-725-440 mm (HLK800) - L-W-H: 1690-725-440 mm (HLK1200)
- working length 1200 mm - surface-mounted loss amant - moveable right supporting arm - steel holder to square shaft 16x16 mm - depth stop over threaded spindle - moveable double-sided end stop - scanning from template and original part- steel holder 16x16 mm with hard metal turning plate HW08 - stencil blank 85x4x1000 mm with notches - weight 46 kg - L-W-H: 1690-725-440 mm (HLK1200)
- working length 1200 mm - surface-mounted loss amant - moveable right supporting arm - steel holder to square shaft 16x16 mm - depth stop over threaded spindle - moveable double-sided end stop - scanning from template and original part - steel holder 16x16 mm with hard metal turning plate HW08 - stencil blank 85x4x1000 mm with notches - weight 46 kg - L-W-H: 1690-725-440 mm (HLK1200)
Außendurchmesser 44 mmAufnahmeschaftØ 8 mm - Radius 21 mm
(800 W / 10,000 - 27,000 rpm) infinitely adjustable with aluminum neck eurobund receiver Ø 43 mm - 8 mm collet chuck
Außendurchmesser 44 mmAufnahmeschaftØ 8 mm vorne Radius 56 mm / Radius 16 mm
swiveling in all directions for milling by woodcarver or mini spot cutter Ø 100 mm or 115 mm Metabo angle grinder WQ1100 with 1000 watts angle grinder, bracket holder, special holder, special protection (without cutter)
Außendurchmesser 40 mmAufnahmeschaftØ 8 mmvorne Radius 5 mm / Radius 13 mm
Special centering collar, inner diameter 35 mm, for Hapfo Extension length 50 mm - total length 82 mm Outer diameter 50 mm Front with EURO anti-run groove (ASR)
milling length 45 mm for perfect roughing
- gradients: 10 / 20 / 40 / 80 / 160 mm - left / right twist over additional wheel - top slide possible to disengage to scanning - top slide possible for fine adjustment with star grip - protection against wood chipsbasic equipment winding and fluting: - steel toothed disc 24er with drilling 34/50 mm - steel toothed disc 24er with drilling 12 mm - steel toothed disc 12 with drilling 12 mm - HPVC tooth belts 30, 40, 60 with drilling 12 mm - HPVC tooth belts 30, 40, 60 with drilling 12 mm and connecting holes - tooth belt L050 length depending on centre height
- gradients: 10 / 20 / 40 / 80 / 160 mm - left / right twist over additional wheel - top slide possible to disengage to scanning - top slide possible for fine adjustment with star grip - protection against wood chips basic equipment winding and fluting: - steel toothed disc 24er with drilling 34/50 mm - steel toothed disc 24er with drilling 12 mm - steel toothed disc 12 with drilling 12 mm - HPVC tooth belts 30, 40, 60 with drilling 12 mm - HPVC tooth belts 30, 40, 60 with drilling 12 mm and connecting holes - tooth belt L050 length depending on centre height
