for polishing set (cotton discs) for clamping into the drill chuck Ø 20 mm with conical thread - receiving shaft Ø 8 mm

with thread M 20 x 1.5 mm with 2 big steel discs Ø 70mm for grinding and polishing wheels

(only grinder without base and accessories) 1400 rpm - 500 W - 230 V with corundum disk Ø 200x40 mm, corundum disk Ø 200x40 mm

for grinding turning tools auxiliary tool for simple and accurate grinding the most common wood chisels - stable angled base plate made of steel - abrasive block 1400 rpm - 500 W - 230 V. - corundum grinding wheel Ø 200 mm - 40 mm wide - normal corundum grinding wheel Ø 200 mm - 40 mm wide underframe base plate with: - sliding carriage double-sided for flat chisel - Tormek grinding device SVD 186R for tubes

einseitig Außengewinde M14 einseitig Innengewinde M14mit Stiftloch zur MontageGesamtlänge 113mm - Ø 20mm

Single-sided external thread Withworth 1/4" Single-sided female thread M14 - total length 80mm

for Optigrind (without motor and grinding devices)

Schleifscheibe Ø 300mm M33DIN800 mit Ablaufsicherungsnut EuroSchleifpapierklettunterlage Ø300mm6 Stück Schleifpapier Ø300mm mit Körnung 60-80-100-120-150-180

This machine is a prerequisite for the use of v-steels. A few seconds grinding of the V-steels is over the quick release and fine delivery guaranteed. For internal grinding of v-steels 40 x 18 mm; exact height positioning movement via precision carriage guide with fine side feed connection 400 V with CEE plug 16 A with CBN grinding wheel Ø 125 mm /- locating hole 32 mm v-steel skewers plexiglass screening device (with CBN grinding wheel)

Edge radius 0,6mm - inside 80° with 5 threads M8 on back High-quality (For grinding, the V-steels must be cleaned with acetone will, since resin residues lubricate the disc!) The V-steels are placed on the inside with a V-steel grinding machine (e.g. V125) ground. Delivery V-steel without steel holder.

Edge radius 1,2mm - inside 80° with 5 threads M8 on back High-quality (For grinding, the V-steels must be cleaned with acetone will, since resin residues lubricate the disc!) The V-steels are placed on the inside with a V-steel grinding machine (e.g. V125) ground. Delivery V-steel without steel holder.

Edge radius 0.6mm - Inside 80° with screw connection M8 - TNG High-quality (For grinding, the V-steels must be cleaned with acetone will, since resin residues lubricate the disc!) The V-steels are placed on the inside with a V-steel grinding machine (e.g. V125) ground. (Delivery V-steel without steel holder)

distance adjustment bracket to grinding wheel

(800 W / 10,000 - 27,000 rpm) infinitely adjustable with aluminum neck eurobund receiver Ø 43 mm - 8 mm collet chuck

for grinding HSS V steels 40x18mm Diamond Coated - Angle 80° - Radius 0.4mm MountingØ 32mm with 3 bores in the pitch circle (When used always clean the V-steels with acetone Resin residues otherwise lubricate the disc)use always the V-steels with acetone clean resin residues otherwise lubricate the disc)

for grinding HSS V steels 40x18mm diamond coated - angle 90° - radius 0.4mm mountingØ 32mm with 3 bores in the pitch circle (When used always the V-steels with acetone clean resin residues otherwise lubricate the disc)

unbenützte V-Stahl-Schleifscheibe mit leichter Beschädigung am Außenradiuszum Schleifen von HSS V-Stählen 40x18mmDiamantbeschichtet - Winkel 90° - Radius 0,4mmAufnahmeØ 32mm mit 3 Bohrungen im Teilkreis Ø44mm

about 180 x 125 mm with dust extraction shank Ø 30 mm extraction nozzle Ø 100 mm fitting in palm rest extraction for sanding pad Ø 300 mm

mit Ablausicherungsnut EURO (ASR)

180 x 125 mm 

durch abziehbare Folie selbstklebend

grain size 60 / 80 / 100 / 120 / 150

Zum Einlegen des Abziehsteins.Sorgt für einen besseren Schliff und höhere Standzeit des Abziehsteins.

for flat chisels suitable for shaft Ø 12 mmAlu